This lathe can be seen
in Houston, TX. We can run under power on short notice.
Mike Starling, HTR Machinery, Houston, TX. B:
281-376-8950.
Brandon Starling, Top Shelf Trading, Cypress, TX. B:
713-851-5733.
VANTAGE
HOLLOW SPINDLE OIL COUNTRY ENGINE LATHE
Specifications:
Model
PA35/V12-120”
Swing over bed
35”
Swing over cross slide
24”
Swing over gap
53”
Center distance
120”
Spindle bore
12.5”
Chuck, steel body
26” 4-jaw with 12.5” bore
Spindle speeds
0-350 rpm (4-speed
variable frequency drive)
Spindle nose
A-2-20
Main motor 40
hp.
Threading
Inch, Metric, Module
Feeds, X-Z
0.001-0.07 ipr,, 0.002—0.14 ipr.
Rapids, X-Z
40”/min; 59”/min
Leadscrew diameter
2”
Cross slide travel
31.5”
Compound travel
17.7”
Quill diameter
4.5”
Quill travel
11.75”
Center
MT 6
Ratio of two speed quill 1:1 and 4:1
Steady rest, roller jaws
1.25”—13 3/4”
Coolant
40 gallon capacity
Electrics
460/3/60
Weight 24,800
lbs.
Standard accessories:
- Spindle variable speed, 4-range speeds by inverter
frequency control,
each range gear changed
by power air.
- Hardened and ground bed and cross slide ways,
lubrication with adjustable timer control pump.
- 6-way rapid traverse and feed- Two speeds
tailstock quill
- Automatic lubrication with way selection system
- Thread chasing dial - Followable rear splash
guard - Low voltage control
- Work light - Tool box - - Spindle
speed with constant surface speed selection switch
- Longitudinal lead screw with full length stainless
steel chip guard
Price: $ 130,000 FOB Houston, TX.
Warranty: One year from date of delivery.
Installation: 2 days of installation and training
provided with purchase.
Terms: 20% down payment with Purchase Order.
Balance due upon installation and acceptance
Optional Accessories on this stock lathe:
4-jaw steel body 28” chuck with 12” through hole---------US
$7,800.00
Rear spindle adapter
plate----------------------------------------------3,500.00
Mechanical taper
attachment------------------------------------------8,800.00
Semi-auto threading (Air
kick-out)---------------------------------10,800.00
40HP main
motor--------------------------------------------------------1,500.00
Full length back splash guard with chip
conveyor---------------11,900.00
Price: $ 174,300. As equipped in the warehouse.
**Also available with a hydraulic taper attachment rather than
a manual taper attachment.
9 out of 10 purchasers prefer the hydraulic taper
attachment.
MACHINE DESCRIPTION:
- These heavy duty lathes were developed and
designed to provide optimum performance with high cutting power
while providing versatility for use in the most demanding
applications.
- Provide high operator efficiency and ease of
operation, and are built and tested to stringent high accuracy
standards.
- Single piece bed casting resting entirely on the
floor for maximum rigidity
- All gears and shafts are made of Cr-Ni steel,
hardened and ground
- Spindle with electric brake
- Natural and removable gaps
